Double Glazing Lock Repairs

A good quality lock on your doors and windows helps to prevent burglars from gaining access to your home. Generally, they don't like breaking glass or squeezing through windows that are not closed.

However, some double glazing owners have had issues with their door or window lock after it's been installed. These problems can often be solved without the need for a new double glazing.

Broken or damaged locks

If your uPVC window or door lock is damaged or defective, then a locksmith can repair it for you. They can fix hinges, striker plates, and locks for double-glazing. They can also move the cylinder to fix any misalignment that could cause your handle to work properly.

If the key fits in the lock but doesn't turn or is difficult to insert the mechanism might be locked up. The dirt or grease could be trapped in the mechanism. If this is the case, it might be possible to clean the lock and then lubricate it. It is crucial to make use of a dry lubricant such as teflon or graphite instead of oil, which attracts dirt and stick to the inside of the mechanism. After you have lubricated the lock, you should insert the key and then try to turn it. The lubricant should be absorbed into the mechanism and the lock should spin effortlessly.

Loose screws within the lock mechanism can be another reason for a broken lock. They can loosen and fall out or even break completely, preventing the lock to work properly. A screwdriver is a tool to tighten these screws but it is important not to tighten them too much as this can damage the internal components.

A faulty lock is dangerous for you and your family. This is particularly true if you have small children. It is possible for them to unlock the door without your knowledge and give them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help you to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair all types of faulty and damaged mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular needs, which means that in a lot of cases replacement windows and doors are not necessary.

Handles that are damaged or damaged

As part of their overall security package many double-glazed windows come with a multipoint lock. This is a great option for those who are concerned about opportunistic thieves looking to gain entry to your home. Ask your locksmith about antilift blocks. They can be put in in addition to existing locks and help keep your windows firmly shut.

Handle locks are often damaged or fail. They are the first component that criminals use to force open your window. The good news is, this is one of easiest parts to repair.

Modern uPVC handles and aluminum handles are equipped with the multi-point locking mechanism referred to as Espagnolette, which is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. As an upgrade option, older style uPVC or aluminium handles that are no longer in use can be upgraded to a shoot bolt locking system.

When a handle is faulty it's important to get this repaired as soon as is possible. A damaged handle can stop the window from closing correctly and letting in a draft. It can also be a flaw that thieves can exploit and put the belongings of your family and your personal belongings at risk.

To repair the damaged mechanism, first gain access to the window frame, then take off the broken handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be found that matches the profile of the internal window frame mechanisms.

Once the mechanism has been replaced, the handle can be fixed using the original screws but we would recommend replacing them with longer ones since this will provide a more secure fit. The final stage is to apply a coat of clear sealant to protect the handle from further rust. Once that's done, your window will be functional again and at less than the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows don't close properly, you may be experiencing draughts, an affliction of your home's security and a higher chance of damp or water damage. Broken or damaged window hinges are a frequent issue that can be fixed easily.

If you have a window made of uPVC that won't open or close it's likely that the hinges are damaged or broken and need to be replaced. While most window manufacturers require you to purchase a whole new window unit to solve this issue, we're able to replace the faulty hinges and save you money.

Window hinges are often damaged after repeated use, or they might be damaged by corrosion over time. In the event of a damaged hinge, it's crucial to take precautions to avoid further damage by taking care not to force the window to open or close.

The type of hinge you are looking for will help you find the right parts to repair it. The most commonly used types of window hinges include Maco, Mila, Roto and other brands. It is recommended to consult a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your current hardware and cause further damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be a major source of noise and also allow for water infiltration which could damage your windows.

Check that the pin barrels on both hinge halves are aligned. If it isn't then tap the headpin using a hammer in order to create a slight bend in hinge barrel. This will hold the pin in position. Ask a second person to hold the door while you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with those that are of the same size, and install the screws with glue. When the glue is drying, secure the hinges with clamps or weights.

After your hinges have been repaired after which you will be able to put back the door uPVC repair and re-attach the handle. It is recommended to replace the screws with the same length of wood dowels as the screw that was originally used so that they align with each one.

Glass that is broken or Faulty

upvc window Repairs Windows can be damaged in time, despite the fact they are excellent at keeping cold out and conserving heat. This could include cracked or damaged glass as well as defective locks. This is a problem that could be extremely costly should it be not addressed. It can also detract from the aesthetics of your house and could lead to a loss of insulation, so it is essential to fix any damage as quickly as you can.

If your glass is cracked, but not broken it is possible to fix it yourself using the appropriate tools and techniques. Make sure the area around the glass that has been broken is free of debris so that any shards do not cause injury or trip hazards. Next, remove any broken pieces and dispose of them properly. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass it's a good idea to prepare the glass before gluing it back in place so that you know you'll have enough space to finish the project.

Before applying the glue wipe the entire surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing, which can vary from product to. You may need to clamp the cracked glass with lightweight clamps designed to hold fragile materials, based on the angle.

Once the adhesive has fully set, carefully place the glass into the window frame. Make sure that it is in line with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful to avoid flexing the window while it's put back in place, as this can weaken the seal and lead to water infiltration and condensation.

Contact a professional glazier such as O'Brien(r), to arrange an appointment to replace your glass if the window is completely shattered. If you leave broken glass unattended, it could be a risk to pet and children and is why it's important to act fast.