Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism deteriorated? Perhaps the handles on your uPVC windows and Repair My Windows And Doors doors aren't aligned properly or are difficult to use.

It's important that your double-glazed doors function smoothly, or else you will lose energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at reasonable costs.

Snapped Key

If a key is snapped off in the lock, it can be extremely difficult. It's also potentially an issue for security, since the door may not be locked and could leave you open to intrusion. Fortunately, there are simple fixes you can use to solve the issue and get your door operating correctly.

First, remember to stay calm. If you panic and begin poking around wildly you could end up pushing the broken piece of the key deeper into the lock, which could make the situation worse.

Spray WD-40, or any other penetrating oil, into the lock. This will help the broken piece come out more easily. You can also use the screwdriver to break any pieces stuck. If you're lucky enough to have a little bit of the key hanging out and you want to remove it, use a paperclip or some other metal object with a thin surface to grab it and then pull it out. Both of these methods work, but be cautious not to push the broken piece of the key deeper into the keyway.

Some paperclips have grooved edges that can serve as a hook extractor, and some jigsaw blades are also suitable for this purpose. If you don't have any of these handy, you can use needle-nose pliers to bend them and create hooks. Also, a pair tweezers is a good way to grip and pull out the last part of the broken key.

If you are unable to remove the broken piece of key Use a lock deicer. It is available in most hardware stores and works by freezing any moisture present inside the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks experts can solve problems like broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to allow them to operate more easily. You can schedule a double-glazing Repair My Windows And Doors online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. Luckily, it's an easy repair for an expert locksmith to complete. To fix the cylinder locksmiths must tap it. This can be accomplished with a hammer, or any other tool. However, the best method is to make use of a wire or a long match. The match or wire's end in the keyway. The locksmith will then hit the lock to crack it. This is better than using a hammer that could cause damage to the lock.

Overheating is the main cause of cylinder heads cracking. This can happen when the cylinder head and block are made of various metals, such as cast-iron or aluminium. Different metals will heat up and cool off at different rates. This could cause localized hotspots to expand more quickly than the rest.

Corrosion can be a reason for cracks in the cylinder. If the cylinder block and head are not maintained properly, they can rust or corrode, which can cause them to expand more than they would normally. In time, this could also cause cracks.

If your uPVC window replacement or door lock is brittle and requires more pressure to turn, it could be due to a variety of reasons. This issue could result from a defective locking mechanism or misalignment, as well as a worn-out handle.

It is a quick and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will usually solve the issue within one hour of arriving at the home. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith can always advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. This is a small cost to pay for the security that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and use, so it's no surprise that they can break. It isn't easy to determine the cause of the broken window handle lock and repair My windows and doors then fix it properly.

Fixing the broken handle, whether it's an internal latch or the locking mechanism, will improve the security of your uPVC door and reduce the risk of draughts. When you aren't doing it right, replacing or repairing your handle can be very costly and may cause damage to the door's frame and lock It is therefore worth taking the time to do it right.

With the window open then loosen the screw that secures the handle by using the screwdriver. The screw should be located on the inside of the backplate, usually concealed by a screw cap for aesthetic reasons. You should not lose any internal parts of the handle like the levers and plates on either side. Keep them in the same order to make it easier to replace them if needed.

Then, rotate the handle until it's 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle using a second screwdriver. Once this is released, you'll be in a position to pull the handle off and take off the damaged spindle. Replace it with a brand new spindle, making sure it's the same length (you can purchase them online or at hardware stores). Screw it in the correct position. Don't over tighten the screw because this could harm the handle as well as the window frame.

Make sure the new handle is fitted, then close and test the handle. It is likely that it will operate smoothly and you'll be able to unlock your window.

While you're working on the handle, don't forget to ensure that your uPVC windows are shut properly. If they're not, you could experience damp and draughts in your home, as and also affecting the efficiency of your home's energy usage. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is most frequent in uPVC tilt and turn windows. These windows require a handle to operate an electronic locking mechanism within the window frame. The handle is attached to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism is not able to open after the handle has been turned, it is most likely the spindle is broken. This could be a frustrating problem.

Luckily, there are ways to fix this problem. A reputable locksmith can quickly and effectively fix this issue. They will be able to take apart the window handle using a tool that removes the wheel portion of the mechanism that is where the spindle is. This can be done without damaging the handle or causing any other damage to the frame of the window.

After the wheel has been removed the technician can then inspect the spindle and determine what caused it to break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This procedure is typically performed by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this will remove any dirt or other debris that might be obstructing its normal functioning. After this the spindle is cleaned, it can be repaired or replaced. If it is being replaced the technician could use an identical dowel size to the one used in the first and drill mating holes into both parts of the spindle. This ensures that the new spindle has precisely matched to the handle.

If the damaged spindle can't be repaired, it might require replacement completely. Home centers can sell generic replacements, but if your window design is unusual, you will require contacting an expert in cabinet making or woodworking who can make the exact part. Once the spindle has been installed, it is connected to the handle. Line up the screw holes on the handle to the screws already in the frame. Once the new handle is firmly in place, you'll be able to operate your uPVC window.