Repairs to uPVC Windows

upvc window repairs windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will stop water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, uPVC repair it's important to act quickly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This can make your window harder to clean and uPVC repair reduce its energy efficiency.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is an easy process but it can be easier to do if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. First, the hinges because of wear and tear, can become misaligned, this causes gaps to develop between the sash and the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them aligned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge side and might require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it could be cheaper to replace them than to repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.