Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to help the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is substantial, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, window repairs durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a number of problems, including sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can get at the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fit. The corners of the sash need to align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer can be applied. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and Window Repairs can decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges at the fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

Verify that the uPVC hinges open and close in the proper direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to offer suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge side and may need to be cleaned. In some cases it might be necessary to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to simply replace them rather than Repair My Windows And Doors them. So, if you're experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.