Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If windows with double glazing repairs Chelmsford panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a good idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk can be put on. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window repairs New Malden more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze It could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and repairmywindowsanddoors can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It is essentially a simple process but it can be easier with someone else to help hold the frame in place.

Check that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph via our website and repairmywindowsanddoors we will be more than happy to give you suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, causing a gap between the frame and sash. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it's possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

The next most common cause of draughts is the window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.

One of the most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be put on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach a point where it is more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.