Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers to assist the new pane to fit properly into the window frame.

If you plan to try to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or double glazing repair iver duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window repairs Lewisham to test the fit after having relocated your hinges. If you are happy with the fit of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could also be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and then perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's important to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a new layer can be put on. When it comes to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the Double Glazing Repair Iver-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with an ease. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change the hinges on a window however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. In addition, the interlock could also become disaligned. It is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace these.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them rather than repair them. If you have any problems with your Upvc window, it's best to consult an expert as soon as possible.